Decaf coffee is made by removing caffeine from green, unroasted coffee beans, then roasting them as usual. The beans are soaked or steamed to open them up, and caffeine is pulled out with water, carbon dioxide or a solvent. In the Swiss Water Process (Swiss Water process decaf coffee), decaf is made using only water, time, temperature and carbon filters, with no added chemical solvents. Other common methods use pressurized CO2, ethyl acetate (“sugarcane” decaf) or methylene chloride.
No method removes 100% of the caffeine. In the US, decaf typically has at least 97% of the caffeine removed, and an 8 oz cup usually contains about 2–15 mg, according to the FDA.
Why caffeine is removed from green beans
Decaffeination happens at specialized facilities, not at your local roaster. Green coffee is shipped to a decaf plant, processed, dried and then shipped on to roasters. Caffeine is water-soluble, and green beans are dense and stable, so they can handle soaking and drying without losing their structure. Removing caffeine before roasting lets roasters develop flavor normally afterward. The challenge for every method is taking out caffeine while keeping as many flavor compounds as possible.
How Swiss Water process decaf coffee is made
- Make “green coffee extract.” A batch of green coffee is soaked in hot water to dissolve its soluble compounds, including caffeine. The caffeine is filtered out with activated carbon, leaving water saturated with coffee flavor compounds but no caffeine.
- Soak new beans in the extract. Fresh green beans are soaked in this flavor-rich extract. Because the extract is already full of the other soluble compounds, mainly caffeine moves out of the beans into the water.
- Filter and repeat. The extract passes continuously through carbon filters that capture caffeine, so it can keep drawing caffeine out of the beans until they reach the target level.
- Dry and ship. The beans are dried back to normal moisture and shipped to roasters.
The Swiss Water company, based in Canada, says its process removes 99.9% of caffeine. Because it uses no added solvents, it is a popular choice for organic decafs.
Mountain Water Process
A similar water-based method is run in Mexico using mountain water. Like Swiss Water, it avoids chemical solvents.
Other decaf methods
CO2 process
Green beans are moistened and placed in a vessel with highly pressurized carbon dioxide. Under these conditions, CO2 acts like a solvent that binds selectively to caffeine. The caffeine-rich CO2 is then separated and recycled. It is efficient for large batches and tends to keep flavor well.
Ethyl acetate (“sugarcane” or “natural” decaf)
Ethyl acetate is a compound found naturally in fruit and can be made by fermenting sugarcane. Beans are steamed and rinsed with ethyl acetate, which dissolves caffeine, then steamed again to remove the solvent. Many Colombian decafs use this method, and they are often described as sweet and fruity.
Methylene chloride (“European” or “direct” method)
Beans are soaked or steamed and treated with methylene chloride, which removes caffeine efficiently while preserving flavor. Residues are reduced by steaming and roasting at high temperatures. The FDA currently allows residues of up to 10 parts per million in decaffeinated coffee. A petition to ban the solvent in food has been under review, and as of mid-2026 the FDA had not announced a decision, according to Barista Magazine.
Decaf methods compared
| Method | Uses | Added solvent? | Flavor notes |
|---|---|---|---|
| Swiss Water Process | Water and carbon filters | No | Clean, sometimes slightly muted |
| Mountain Water Process | Water and filters | No | Clean, sweet |
| CO2 process | Pressurized carbon dioxide | No (CO2 is recycled) | Keeps flavor well |
| Ethyl acetate (sugarcane) | Ethyl acetate | Yes, naturally derived | Often sweet, fruity |
| Methylene chloride | Methylene chloride | Yes | Keeps flavor well |
A short history of decaf
The first commercial decaffeination process was developed in Germany in the early 1900s by coffee merchant Ludwig Roselius. It used benzene as a solvent, which is no longer used because of health concerns. Over the following century, safer solvents and then water and CO2 methods were developed. The Swiss Water Process was commercialized in the 1980s, and today specialty roasters increasingly treat decaf as a quality product rather than an afterthought.
Decaf myths
- “Decaf has no caffeine.” It has a small amount, usually a few milligrams per cup.
- “Decaf is made from lower-quality beans.” It used to be common, but many roasters now decaffeinate high-grade specialty coffee.
- “All decaf uses harsh chemicals.” Several popular methods use only water or CO2.
- “Decaf can’t make good espresso.” Fresh, well-roasted decaf can make excellent espresso with a little extra care when dialing in.
- “Dark roasting removes caffeine.” Roasting changes caffeine very little; only decaffeination removes most of it.
Does the decaf method affect taste?
All methods change the beans a little, and some flavor compounds are lost along with caffeine. Today, the quality of the green coffee and the roasting usually matter more than the method itself. A carefully roasted, fresh Swiss Water decaf from a good roaster can taste better than a stale, dark-roasted decaf made any other way.
Decaf beans are also more porous after processing, so they roast faster and can go stale a little sooner. They may also grind and extract differently. See our guide to decaf espresso for brewing tips.
How to brew decaf for the best flavor
- Grind just before brewing. Decaf loses aroma faster, so fresh grinding matters even more.
- Start slightly coarser for espresso. Decaf often extracts quickly and can turn bitter.
- Use water around 90–94°C for filter brewing if your kettle allows.
- Store airtight and finish the bag within a few weeks of roasting, keeping it away from heat and light.
For ratios by brew method, see how much coffee to use per cup.
How to choose decaf coffee
- Check the label for the method. Specialty roasters usually name it: Swiss Water, Mountain Water, CO2 or sugarcane.
- Choose solvent-free methods if you prefer to avoid chemical solvents.
- Look for a recent roast date and buy smaller bags.
- Pick medium roasts for balanced flavor; very dark decaf can taste flat.
- Try different origins. Colombian sugarcane decafs and Swiss Water decafs from Central America are popular starting points.
For health questions, such as drinking decaf while pregnant, see our article on decaf coffee during pregnancy and ask your doctor for personal advice. For bean picks, see our list of the best coffee beans for espresso.
FAQ
What is the Swiss Water Process?
A decaffeination method that uses water and activated carbon filters, with no added chemical solvents, to remove caffeine from green coffee beans.
Is Swiss Water decaf completely caffeine-free?
No decaf is completely caffeine-free. Swiss Water says its process removes 99.9% of caffeine, leaving a very small amount.
Which decaf method tastes best?
There is no single winner. Bean quality, freshness and roasting usually matter more than the method. Many people find CO2 and sugarcane decafs especially flavorful.
Is methylene chloride decaf safe?
It is currently permitted by the FDA within a strict residue limit, but a petition to ban it is under review. If you prefer to avoid it, choose Swiss Water, Mountain Water, CO2 or sugarcane decaf.
Why does decaf cost more?
Decaffeination is an extra processing step with its own equipment, energy and shipping, which adds cost before roasting.